Power amps in pedal format

Your board. Now with 280 watts.

The Guitar Board Amp turns whatever is on your pedalboard into a complete guitar rig — Kemper Player, Helix, Fractal, UAFX amp pedals, tube preamp pedals or anything else with an output. Just add a cabinet. Two versions: mono or stereo.

2
Models
from €399
Starting price
280 W
Max. power
GBA SHP · 360°
Pedal format

85 × 130 × 230 mm: the GBA sits on your pedalboard or right next to it on the stage floor. No rack, no amp head, no extra case.

No fan – completely silent

Both versions work without a fan. No humming, no hiss — ideal for the studio, the living room and other quiet places.

Very light – 1 kg

The GBA weighs just 1 kg. Your whole rig fits into one pedalboard case and goes to the gig in one trip.

Works with almost anything

Modelers, amp pedals, tube preamps, bass preamps: if it has an output, the GBA makes it loud through a real cabinet — transparent, without adding its own colour.

Two models

Mono or stereo.

Both models share the same compact housing (85 × 130 × 230 mm, 1 kg) and the same silent design without a fan. Mains cable included.

RITTER Guitar Board Amp 280
Home · Rehearsals · Club gigs · Stage

Guitar Board Amp 280

280 W mono power amp for your pedalboard. Comparable to a 200+ W tube amp head — all you need is a guitar cabinet.

€399.00 incl. 19 % German VATVAT-free for orders outside the EU
I want it! →
RITTER Guitar Board Amp SHP
Stereo · Bridged mono · Large stages

Guitar Board Amp SHP

The flagship of the series: 2×140 W stereo or 280 W bridged mono — enough for low-tuned guitars, bass and open-air stages. Full power at 4, 8 or 16 Ohm.

€499.00 incl. 19 % German VATVAT-free for orders outside the EU
I want it! →

Comparison

Both models at a glance.

Not sure which model is right for you? The table helps — or just drop me a line.

Feature GBA 280 GBA SHP
Main use Home, studio, rehearsals, club gigs, large stages Home, studio, rehearsals, club gigs, large stages — in stereo
Channels / mode Mono (1 channel) Stereo (2×) or mono (bridged)
RMS power 280 W @ 4 Ohm
245 W @ 8 Ohm
125 W @ 16 Ohm
2×140 W stereo / 1×280 W bridged
at 4, 8 or 16 Ohm **
Burst power * 1000 W @ 4 Ohm 2×500 W stereo / 1×1250 W bridged
Speaker impedance 4, 8 or 16 Ohm 4, 8 or 16 Ohm
Input ¼" jack, mono, unbalanced ¼" jacks, unbalanced
Speaker outputs 1 × Speakon / ¼" combi Bridged: Speakon / ¼" combi
Left, Right: ¼" jack
Fan none – silent none – silent
Mains voltage worldwide (86–260 V AC, 50–60 Hz) worldwide (85–265 V AC, 50–60 Hz)
Weight 1 kg 1 kg
Dimensions (H×W×D) 85 × 130 × 230 mm
(3.34 × 5.11 × 9.0 in)
85 × 130 × 230 mm
(3.34 × 5.11 × 9.0 in)
Price (incl. VAT) €399.00 €499.00
Order Details & order → Details & order →
* Burst Power

The short-term power reserve for dynamic peaks — exactly those moments when you pick harder or a signal briefly demands more energy. An amp with enough reserve stays stable and never sounds squashed. Technically it is power that is only there for milliseconds, but you can hear it — more air, more control, a nicer feel under your fingers.

** SHP output power

The output power of the SHP is limited only by the capacity of its internal power supply — so it delivers its power regardless of the connected impedance (4, 8 or 16 Ohm). A single speaker on one stereo output can get up to 280 W; with a speaker on each stereo output the power is shared (e.g. 2×140 W). The bridged output also delivers a nominal 280 W, but the internal voltages double, so its burst power more than doubles (1250 W).

Testimonials

What musicians say.

★★★★★

I use the Guitar Board Amp 280 as the power amp for my Kemper Profiler Player, with my 2×12 or whatever is on site at gigs. Easy plug & play, no unnecessary knobs. Clean, crunch or high gain — the sound stays clean at any volume, without hum or noise.

P
Philipp
GBA 280 · Absolutely recommended · translated
★★★★★

I use this power amp for bass. It has massive power and cuts through even in metal. A clear recommendation.

T
Tom Becker
GBA 280 · Great for bass · translated
★★★★★

Tested it in the rehearsal room with my Kemper Stage. On my Palmer 1×12 and my Engl XXL it sounds phenomenal! I had two other (cheaper!) solutions before, but the GBA plays in a completely different league.

G
Gerhard
GBA 280 · Worth every cent · translated
★★★★★

I paired this with a Fractal FM3, and with a bit of parametric EQ inside the FM3, I was able to get a pretty convincing “Metal” tone. I’m using the SHP bridged into a Marshall 4x12 @16 ohm and there’s enough volume for most any gig.

J
Johnny Eggz
GBA SHP · Really does the job
★★★★★

After a long search, the ideal way to amplify the modeler sounds of my Fractal FM9 through a real guitar cabinet. The first impression after switching on: silence! No fan noise, no hiss or hum. Plenty of power reserve, even with a 16 ohm cabinet.

G
Gerald
GBA SHP · Great piece & excellent service · translated

Works with

One amp, many rigs.

The GBA is a pure power amp. Connect the output of your modeler, amp pedal or preamp — usually with the cabinet simulation switched off — and plug in a regular guitar cabinet. It reproduces exactly what you feed it, at any volume.

Customers run it with Kemper Player and Stage, Fractal FM3 and FM9, and on bass — from the living room to the Wacken Open Air stage.

Typical setups · both models

Kemper Profiler Player / Stage modeler
Line 6 Helix / HX Stomp modeler
Fractal FM3 / FM9 modeler
UAFX and other amp pedals amp pedal
Tube preamp pedals preamp
Bass preamps & DI pedals bass

Manufacturing lead time: 2 weeks · 30-day money-back guarantee

FAQ

Questions & answers.

What can I connect to the GBA?

Anything that delivers a finished guitar or bass amp sound at its output: modelers such as Kemper Player, Line 6 Helix or Fractal FM3/FM9, amp-in-a-box pedals such as UAFX, tube preamp pedals or bass preamps.

Switch off the cabinet simulation (IR) for the output that feeds the GBA — the real cabinet does that job.

Why doesn’t the GBA have a volume control or EQ like other pedal amps?

Because it doesn’t need them. I designed the GBA as a pure power amp for your pedalboard, with no extra controls on purpose.

Your sound is shaped by your guitar and by the pedals, modeler or preamp in front of the GBA. Almost all of them already have an output volume control, and a second volume knob right after the first one adds nothing.

Think of the GBA as the power stage of a tube amp: there, too, EQ and volume sit in the preamp, before the power amp and not inside it.

Which speaker impedances (ohms) can my cabinets have?

You can use cabinets with 4, 8 or 16 ohms with both models.

The GBA 280 delivers 280 W at 4 ohms, 245 W at 8 ohms and 125 W at 16 ohms.

The GBA SHP delivers its power regardless of the connected impedance. You can also run different impedances on different outputs, e.g. 4 ohms on the Right output and 16 ohms on the Left output.

Can I use the Bridged output of the SHP together with the stereo outputs?

No. The Bridged output uses both stereo channels and combines them into one powerful mono output. When the Bridged output is in use, no cabinets may be connected to the stereo outputs.

So the Bridged output is always used on its own.

Which cables and plugs should I use to connect the speakers?

Always use speaker cable, at least 0.7 mm² and two-core. Please do not use signal cables such as a guitar cable – they are not designed for the high currents!

The output of the GBA 280 and the Bridged output of the GBA SHP accept both Speakon and ¼" (6.3 mm) jack plugs; the Left and Right outputs of the SHP take ¼" jack plugs. Wherever possible, I recommend Speakon plugs: they lock, are designed for speaker currents and are electrically insulated.

If you want to use metal jack plugs, make sure the plugs don't touch each other – neither the speaker plugs among themselves nor the speaker plugs and the signal patch cables. Otherwise this can cause interference or dropouts.

My speakers have a low maximum power rating, e.g. 50 W. The GBA can deliver 280 W. Are my speakers at risk?

It always makes sense to be careful and considerate when connecting speakers to power amps. Usually you can hear when a speaker is being overloaded – then you should turn the volume down.

Many players use cabinets they previously ran with tube amps, for example. Use those volume levels as a guide so you don't put your speakers at risk.

How big is the GBA — will it fit on my pedalboard?

Both models measure 85 × 130 × 230 mm (H×W×D, 3.34 × 5.11 × 9.0 in) and weigh 1 kg. They fit on most medium and large pedalboards, or sit right next to the board on the stage floor.

Does the GBA have a fan?

No. Both models work without a fan. They are completely silent.

Can I power my pedals from the GBA?

No. Unlike the QC Amp Base, the GBA has no internal DC supply — please use your usual pedalboard power supply.

I live in the US. Do I have to pay import fees?

Shipments to the US may incur import duties, taxes and carrier handling fees charged on arrival. As a real-world example, a US customer reported approx. USD 100 in such fees on a USD 500 order (late 2025). These charges are not included in the product price and may vary.

Contact

Questions? Write to me.

Requests or questions about the Guitar Board Amp? I'll answer personally, usually on the same working day.