Stereo power amp for travelling musicians

The whole amp. In your carry-on.

The Traveller is the stereo power amp from the GBA SHP in a smaller, lighter housing — with a volume knob and Speakon on every output. Pack it with your modeler or a few pedals, plug into any cabinet at the venue, anywhere in the world.

0.8 kg
Weight
€547
Price
280 W
Max. power
GBA Traveller · 360°
Fits in your carry-on

60 × 193 × 130 mm and only 0.8 kg. The Traveller fits into cabin baggage, a gig bag pocket or under your pedalboard.

Works worldwide

Universal mains input, 85–265 V AC, 50–60 Hz. No voltage switch, no transformer — just the right mains cable for the country.

Volume knob on board

Unfamiliar cabinet, shared backline, quick changeover: set your stage volume right on the amp in seconds.

Speakon on every output

Left, Right and Bridged all take Speakon or ¼" jack plugs. Stereo or 280 W mono — whatever cabinets the venue has.

The Traveller

Same amp. Smaller box.

Inside, the Traveller is the same stereo power amp as the GBA SHP. The housing is new: flatter, lighter, with Speakon on every output and a volume knob — built to be the Swiss army knife among my power amps.

RITTER Guitar Board Amp Traveller
Fly gigs · Stereo · Bridged mono · Any stage

Guitar Board Amp Traveller

2×140 W stereo or 280 W bridged mono, full power at 4, 8 or 16 Ohm. With volume knob, Speakon outputs and worldwide mains input — 0.8 kg.

€547.00 incl. 19 % German VATVAT-free for orders outside the EU
I want it! →

At a glance

Power 2×140 W stereo / 280 W bridged
Speaker impedance 4, 8 or 16 Ohm
Speaker outputs Speakon / ¼" combi ×3
Controls Volume
Mains 85–265 V AC, worldwide
Weight 0.8 kg (1 lb 12 oz)
Size (H×W×D) 60 × 193 × 130 mm
Fan none – silent

Mains cable included · Manufacturing lead time: 2 weeks · 30-day money-back guarantee

Comparison

Traveller vs. GBA SHP.

Same amp inside — the differences are in the housing. Not sure which one fits your rig? Just drop me a line.

Feature Traveller GBA SHP
Main use Fly gigs, travel, rehearsals, club gigs, large stages Home, studio, rehearsals, club gigs, large stages — in stereo
Amp inside identical: stereo or bridged mono identical: stereo or bridged mono
RMS power 2×140 W stereo / 1×280 W bridged
at 4, 8 or 16 Ohm **
2×140 W stereo / 1×280 W bridged
at 4, 8 or 16 Ohm **
Burst power * 2×500 W stereo / 1×1250 W bridged 2×500 W stereo / 1×1250 W bridged
Input ¼" jacks, unbalanced ¼" jacks, unbalanced
Speaker outputs Speakon / ¼" combi: Left, Right, Bridged Bridged: Speakon / ¼" combi
Left, Right: ¼" jack
Volume control yes no – pure power amp
Fan none – silent none – silent
Mains voltage worldwide (85–265 V AC, 50–60 Hz) worldwide (85–265 V AC, 50–60 Hz)
Weight 0.8 kg (1 lb 12 oz) 1 kg
Dimensions (H×W×D) 60 × 193 × 130 mm
(2.36 × 7.60 × 5.12 in)
85 × 130 × 230 mm
(3.34 × 5.11 × 9.0 in)
Price (incl. VAT) €547.00 €499.00
Order Details & order → Details & order →
* Burst Power

The short-term power reserve for dynamic peaks — exactly those moments when you pick harder or a signal briefly demands more energy. An amp with enough reserve stays stable and never sounds squashed. Technically it is power that is only there for milliseconds, but you can hear it — more air, more control, a nicer feel under your fingers.

** Output power

The output power of the Traveller and the GBA SHP is limited only by the capacity of its internal power supply — so it delivers its power regardless of the connected impedance (4, 8 or 16 Ohm). A single speaker on one stereo output can get up to 280 W; with a speaker on each stereo output the power is shared (e.g. 2×140 W). The bridged output also delivers a nominal 280 W, but the internal voltages double, so its burst power more than doubles (1250 W).

Testimonials

What musicians say.

★★★★★

I use the Traveller in mono with a Quad Cortex. Top-quality craftsmanship and first-class sound. I didn’t expect it to keep up in volume with my amp heads (JCM800 & Deliverance 120), but it does — easily! Tested with a 4×12; next I’m getting a 2×12, so there’s less to carry.

C
Carsten Wagner
Traveller · Top! · translated

Your review here

The Traveller is still new. Already playing one? I’d love to hear where it has travelled with you — leave a review in the shop.

Write a review →

Works with

Pack light. Play anywhere.

The Traveller is a power amp, not a preamp. Connect the output of your modeler, amp pedal or preamp — usually with the cabinet simulation switched off — and plug in a regular guitar cabinet. It reproduces exactly what you feed it, at any volume.

Fly rig in the backpack, Traveller in the side pocket, a cabinet from the venue’s backline — and you sound like yourself on any stage. Its amp is the same one customers run with Kemper, Fractal and Quad Cortex, on guitar and on bass.

Typical setups

Kemper Profiler Player / Stage modeler
Line 6 Helix / HX Stomp modeler
Fractal FM3 / FM9 modeler
UAFX and other amp pedals amp pedal
Tube preamp pedals preamp
Bass preamps & DI pedals bass

Manufacturing lead time: 2 weeks · 30-day money-back guarantee

FAQ

Questions & answers.

What can I connect to the Traveller?

Anything that delivers a finished guitar or bass amp sound at its output: modelers such as Kemper Player, Line 6 Helix or Fractal FM3/FM9, amp-in-a-box pedals such as UAFX, tube preamp pedals or bass preamps.

Switch off the cabinet simulation (IR) for the output that feeds the Traveller — the real cabinet does that job.

Why does the Traveller have a volume knob — and the GBA doesn’t?

Because Traveller players asked for it. The GBA is a pure power amp for your pedalboard: volume and EQ happen in front of it, so it doesn’t need extra controls.

The Traveller is made for a different life. On the road you often plug into a cabinet you have never played before, share a backline or have five minutes for a changeover. A volume knob right on the amp lets you set your stage level in seconds — without digging into the settings of your modeler.

Can I take the Traveller on a plane?

At 0.8 kg and 60 × 193 × 130 mm it fits easily into cabin baggage. It runs on any mains voltage from 85 to 265 V (50–60 Hz), so it works worldwide — you only need the right mains cable or plug adapter for the country.

Which speaker impedances (ohms) can my cabinets have?

You can use cabinets with 4, 8 or 16 ohms.

The Traveller delivers its power regardless of the connected impedance. You can also run different impedances on different outputs, e.g. 4 ohms on the Right output and 16 ohms on the Left output.

Can I use the Bridged output together with the stereo outputs?

No. The Bridged output uses both stereo channels and combines them into one powerful mono output. When the Bridged output is in use, no cabinets may be connected to the stereo outputs.

So the Bridged output is always used on its own.

Which cables and plugs should I use to connect the speakers?

Always use speaker cable, at least 0.7 mm² and two-core. Please do not use signal cables such as a guitar cable – they are not designed for the high currents!

The speaker sockets accept both Speakon and ¼" (6.3 mm) jack plugs. I recommend using Speakon plugs: they lock, are designed for speaker currents and are electrically insulated.

If you want to use metal jack plugs, make sure the plugs don't touch each other – neither the speaker plugs among themselves nor the speaker plugs and the signal patch cables. Otherwise this can cause interference or dropouts.

My speakers have a low maximum power rating, e.g. 50 W. The Traveller can deliver 280 W. Are my speakers at risk?

It always makes sense to be careful and considerate when connecting speakers to power amps. Usually you can hear when a speaker is being overloaded – then you should turn the volume down.

Many players use cabinets they previously ran with tube amps, for example. Use those volume levels as a guide so you don't put your speakers at risk.

Does the Traveller have a fan?

No. It works without a fan and is completely silent.

Can I power my pedals from the Traveller?

No. The Traveller has no internal DC supply — please use your usual pedalboard power supply.

I live in the US. Do I have to pay import fees?

Shipments to the US may incur import duties, taxes and carrier handling fees charged on arrival. As a real-world example, a US customer reported approx. USD 100 in such fees on a USD 500 order (late 2025). These charges are not included in the product price and may vary.

Contact

Questions? Write to me.

Requests or questions about the Traveller? I'll answer personally, usually on the same working day.